Saya Outline

True-scale outlines of your knives, ready for a saya.

Scan or trace each blade, mark where it meets the handle, and print a 1:1 pattern your saya maker can work from.

Scanning and tracing
191.9 mm 52.9 mm
A santoku traced from a 300 dpi scan. The two dots are the only points marked by hand.
1

Scan or trace your knives

Scan the knife itself for the most accurate outline, or trace it on a printed sheet when the blade is too long for your scanner or you don't have one. One upload can mix both.

Scan the knife

Flatbed scanner. Accurate to about 0.2 mm.

  • 300 dpi, color, full pageTurn off auto-crop so the page size sets the scale.
  • Lid open, dark cloth over itBright steel on a dark background traces cleanly.
  • Long blades go corner to cornerDiagonally, a letter scanner fits about 310 mm from tip to handle. Let the handle hang off.

Trace it on a sheet

Any printer and a pen. Scanning the traced sheet gives the best result.

  • Print the tracing sheet at Actual SizeLetter and A4 fit blades up to about 225 mm. Use 11 x 17 or A3 for up to about 370 mm.
  • Trace with a fine pen held uprightKeep it against the steel all the way round, then close the shape with a straight line across the ferrule.
  • Scan it, or photograph it from straight aboveA phone photo is quicker but less accurate: lens distortion and camera angle can add a millimeter or more. If you use one, keep the sheet flat, every black square in view, and shoot from a little further back with some zoom.
Download tracing sheet
Drop scans or photos here, or choose filesKnife scans and tracing sheets, as PDF, JPG, PNG or TIFF, up to 40 MB each